|
|
|
2015.01 Discontinued STOCK ONLY |
|
|
|
JAN : 4515615003149
UPC : 840433000310 |
|
-
PT9Pro+ by use of high-performance light dependent resistor device and tenstage phasing provides
studio quality smooth phase sound with low noise.
-
PT9Pro+ uses a stabilized DC-DC voltage converter to bump 9 volts up to plus and minus 9 volts.
PT9Pro+ provides wide dynamic range and sufficient head room against distortion.
-
RATE LED brightness synchronizes with phase shift speed. It makes it easy
to see the rate.
-
True Bypass Switching using 4PDT switch lets your instrument’s signal pass
through a non-electronic
bypass line when the effect is disengaged, feeding your amp with direct,
unaltered signal from your
instrument.
- Easy-access, no tools battery compartment.
-
MADE IN JAPAN
|
|
Input Impedance |
500k ohms |
Output Impedance |
10k ohms |
Maximum output level |
+18dBu (1kHz) |
Speed Frequency |
0.055 to 8.3Hz (18Sec to 120mSec) |
Residual Noise |
-95dB (Input shorted, IHF-A weighted) |
Control |
SPEED,FEEDBACK,WIDTH |
Indicator |
BYPASS/EFFECT LED,RATE LED |
Power Supply |
6F22/6LF22 9V battery x 1 or Maxon AC adaptor |
Internal circuit voltage |
±9V(DC to DC Converter) |
Power Consumption |
32mA/9V,30mA/10V |
Battery life |
Panasonic NEO battery 6F22NB Approx 3.0 hours
@ 77deg F / 25deg C
Panasonic ALKALINE battery 6LR61G Approx 8.4 hours
@ 77deg F / 25deg C |
Dimensions |
74(W)×124(D)×54(H)mm |
Weight |
580g (including battery) |
Accessory |
6F22 9V battery x 1, operating manual |
|
※0dBu=0.775Vrms
※Specifications are subject to change without notice. |
|
|
User's Guide→【1.6MB】 |
|
▲PEGE TOP |
© 2008 NISSHIN ONPA CO., LTD. |