|
|
 |
|
|
 |
 |
JAN : 4515615003132
UPC : 840433000303 |
 |
-
CP9Pro+ by use of high-quality VCA (voltage controlled amplifier) and RMS (root-mean-square) sensor,
provides natural attack response with low noise.
-
CP9Pro+ uses a DC to DC voltage converter to bump 9V up to 18V.
CP9Pro+ provides wide dynamic range and sufficient head room against distortion.
-
Compression/Limit level response to picking dynamics is easily viewable
with Threshold LED.
-
True Bypass Switching using 4PDT switch lets your instrument’s signal pass
through a non-electronic bypass line when the effect is disengaged, feeding
your amp with direct, unaltered signal from your instrument.
- Easy-access, no tools battery compartment.
-
MADE IN JAPAN
|
 |
| Input Impedance |
500k ohms |
| Output Impedance |
10k ohms or less |
| Maximum output level |
+18dBu (1kHz) |
| Distortion ratio |
0.01% (1kHz) At 0dB output |
| Residual Noise |
-95dBu (Input shorted, IHF-A weighted) |
| Control |
THRESHOLD / 0dBu to -40dBu
RATIO / 1:1 to ∞:1
GAIN / 0dB to +30dB |
| Indicator |
BYPASS／EFFECT LED
REDUCTION LED
When REDUCTION LED lights, compression is more than 3dB. |
| Power Supply |
6F22/6LF22 9V battery x 1 or Maxon AC adaptor |
| Power Consumption |
25mA/9V,23mA/10V |
| Battery life |
Panasonic NEO battery 6F22NB
Approx 5.1 hours @ 77deg F / 25deg C
Panasonic ALKALINE battery 6LR61G
Approx 12.4 hours @ 77deg F / 25deg C |
| Dimensions |
74(W)×124(D)×54(H)mm |
| Weight |
580g (including battery) |
| Accessory |
6F22 9V battery x 1, operating manual |
|
※0dBu=0.775Vrms
※Specifications are subject to change without notice.
|
|
| |
User's Guide→ 【1.6MB】 |
|
▲PEGE TOP |
| © 2008 NISSHIN ONPA CO., LTD. |
