EFFECTS

 
  

 
 
   
  JAN : 4515615006591
UPC : 840433001751
  
 
  • Authentic tube compressor offers warm yet bold compression/limiter sound.

  • Low noise and wide dynamic range with precise RMS level detecting circuit and high-performance VCA
    (voltage controlled amplifier).

  • Studio-level setting is available with 3 controls (THRESHOLD, RATIO, GAIN) and 2 envelope controls
    (ATTACK, RELEASE).

  • Variable threshold level (0dBu to -40dBu) offers optimal compression settings.
    NR status LED precisely reflects compression effect while offering easily viewable setting.

  • Variable compression ratio from 1:1 to infinity:1. Output gain is also variable (0dB to 30dB).
    “Brick Wall” limiter and “Soft Knee” compression effects available.

  • 9VDC supplied from AC adaptor is bumped up to 25V (±12.5V) and supplied to compressor/limiter circuit.
    High-headroom and full-range frequency response allows RTC600 to be used with any musical instrument.

  • When power is turned on, tube heater inrush current control circuit extends tube life.

  • TBS (True Bypass Switching) using 4PDT mechanical switch.

  • AC adaptor AC2009 can be used worldwide from 100VAC to 240VAC by auto voltage sensing.
    Main countries’ safety standard approved.

  • FCC Part 15 compliant. RoHS compliant. Made in Japan with confidence.


 


  Input Impedance   500k ohms
  Output Impedance   10k ohms
  Maximum Output Level   +20dBu (at 1kHz)
  Residual Noise   -94dBu or less (Input shorted, IHF-A weighted)
  T.H.D.+N,    0.02% or less (at 1kHz, -10dBu output)  
  Control   THRESHOLD: 0dBu to -40dBu
  RATIO: 1:1 to infinity:1
  GAIN: 0dB to +30dB
  ATTACK:(for 20dB gain decrease) 20mSec to 600mSec
  RELEASE: (for 20dB gain increase) 140mSec to 700mSec
  Switch   BYPASS/EFFECT
  I/O   INPUT JACK,OUTPUT JACK,DC INPUT JACK
  Indicator    BYPASS/EFFECT LED, REDUCTION LED
  (When REDUCTION LED lights, compression is more than 4dB.)
 
  Power Supply   Maxon AC adaptor
  Power Consumption   240mA/9VDC
  Internal Circuit Voltage   ±12.5V(DC to DC Converter)
  Dimensions   121(W)×152(D)×60(H)mm (with protrusion)
  Weight   Approx. 580g (without AC adaptor)
  Accessory   Maxon AC adaptor(AC2009) x 1, operating manual

 ※0dBu=0.775Vrms
 ※Specifications are subject to change without notice.
 
  User's Guide→【12.5MB】
▲PEGE TOP
 © 2011 NISSHIN ONPA CO., LTD.