|
|
 |
|
|
 |
 |
JAN : 4515615007765
UPC : 840433001980 |
 |
-
Modeled after the legendary sounds of late 60’s British fuzz tones, the FW10’s classic circuit design
provides a smooth, mid-gain fuzz effect that is rich in harmonic overtones. -
In VINTAGE mode the FW10 offers classic 60’s fuzz, while HOT mode provides
increased gain and
additional low-end response.
-
BUFFER ON/OFF switch engages output buffer when set to ON.
Buffer setting converts signal to low impedance, providing a smoother,
more authentic reproduction
of original guitar tone.
-
True Bypass Switching lets your instrument's signal pass through a non-electronic
bypass line
when the effect is disengaged, feeding your amp with direct, unaltered
signal from your instrument.
-
LED to indicate bypass/effect and battery condition for trouble-free performance.
- Operates with 9V battery or standard AC adaptor for 9V (not included).
-
MADE IN JAPAN
|
 |
| Input Impedanc |
20k ohms |
| Output Impedance |
10k ohms (BUFFER ON), 50k ohms (BUFFER OFF) |
| Maximum Gain |
57dB (2kHz) |
| Input Noise |
-121dB or less (Input shorted, IHF-A weighted) |
| Control |
ATTACK,LEVEL |
| Switch |
BYPASS／EFFECT, VINTAGE／HOT, BUFFER ON／OFF |
| Indicator |
BYPASS／EFFECT LED |
| Power Supply |
6F22/6LF22 9V battery x 1 or Maxon AC adaptor |
| Power Consumption |
7mA/9VDC |
| Battery Life |
9VDC manganese battery 81hours 25 deg C（FUJITSU 6F22）
9VDC alkaline battery 119 hours 25 deg C（TOSHIBA 6LF22） |
| Dimensions |
70(W)×113(D)×56(H)mm (with protrusion) |
| Weight |
Approx. 320g (incl. battery) |
| Accessory |
6F22 9V battery x 1, operating manual |
|
※0dBu=0.775Vrms
※Specifications are subject to change without notice. |
|
| |
User's Guide→ 【3.3MB】 |
|
▲PEGE TOP |
| © 2013 NISSHIN ONPA CO., LTD. |
