|
|
 |
|
|
 |
 |
JAN : 4515615007802
UPC : 840433002024 |
 |
-
FE10 expands on Octave/Fuzz sounds of FA10 by adding a parametric tone
section to the circuit.
-
By selecting a specific frequency and boosting or cutting it accordingly, a wide array of new and unique
guitar tones can be created.
-
True Bypass Switching lets your instrument's signal pass through a non-electronic
bypass line
when the effect is disengaged, feeding your amp with direct, unaltered
signal from your instrument.
-
LED to indicate bypass/effect and battery condition for trouble-free performance.
- Operates with 9V battery or standard AC adaptor for 9V (not included).
-
MADE IN JAPAN
|
 |
| Input Impedanc |
100k ohms |
| Output Impedance |
100k ohms |
| Maximum Gain |
55dB（700Hz）EQ B/C FLAT |
| Input Noise |
-112dB or less (Input shorted, IHF-A weighted) |
| Control |
EXPANDER,LEVEL,EQ B/C,EQ FREQ |
| Switch |
BYPASS／EFFECT |
| Indicator |
BYPASS／EFFECT LED |
| Power Supply |
6F22/6LF22 9V battery x 1 or Maxon AC adaptor |
| Power Consumption |
12mA/9VDC |
| Battery Life |
9VDC manganese battery 39 hours 25 deg C（FUJITSU 6F22）
9VDC alkaline battery 62 hours 25 deg C（TOSHIBA 6LF22） |
| Dimensions |
70(W)×113(D)×56(H)mm (with protrusion) |
| Weight |
Approx. 310g (incl. battery) |
| Accessory |
6F22 9V battery x 1, operating manual |
|
※0dBu=0.775Vrms
※Specifications are subject to change without notice. |
|
| |
User's Guide→ 【3.3MB】 |
|
▲PEGE TOP |
| © 2013 NISSHIN ONPA CO., LTD. |
